-40%

NEW Pelco Sarix IBP Series IBP219-ER 2MP Environmental IR Bullet Camera 3 to 9m

$ 157.87

Availability: 26 in stock

Description

Pelco
Sarix IBP Series IBP219-ER 2MP Environmental IR Bullet Camera with 3 to 9mm Lens
Pelco IBP219ER overview
The light gray
Sarix IBP Series IBP219-ER 2MP Environmental IR Bullet Camera with 3 to 9mm lens
from
Pelco
features a remote zoom lens for wide angle or long range surveillance needs. Autofocus capability ensures the camera can be automatically refocused when needed. Additionally, the camera offers advanced color accuracy and advanced integrated adaptive IR illumination for increased sensitivity in low-light installations. It features a mechanical IR-cut filter.
The IBP219-ER Bullet Camera supports up to 2 simultaneous video streams and a third service stream. The 2 streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and bit rates to optimize image quality with bandwidth and storage efficiency.
In addition, the camera features onboard edge storage with a microSD card (sold separately). Video clips of varying lengths can be stored to the card upon alarm, or video can be written continuously to the microSD card in the case of network outage. Video can be retrieved from the card through the FTP protocol.
Simple motion detection algorithms allow the camera to record or trigger an alarm when motion is detected in a selected zone or with the entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. It seamlessly connects to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). It also integrates with major third-party video management systems through the open Pelco API and other third-party software and systems through the open ONVIF Profile S standard.
A standard Web browser interface allows for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming.
Maximum resolution up to 1920 x 1080 (2.1MP) resolution
Up to 30 images per second (ips) at 1080p
Autofocus motorized remote varifocal zoom lens
Advanced low-light capability with sensitivity down to 0.0 lux in the night mode with integrated adaptive IR illumination
Dual analytics
Easy to install
Accurate color reproduction
Accessible edge storage with micro SDXC card
Motion detection and camera sabotage detection
IP66-rated
Power over Ethernet (PoE) and 24VAC power input
Compatible with Pelco and third-party video systems
ONVIF Profile S conformant
Light gray finish (RAL 9022); satin texture