Bosch NDN-498V09-21PS FlexiDome2X Day/Night IP Camera

Description

The
Bosch NDN-498V09-21P FlexiDome2X Day/Night IP Camera
is a vandal-resistant, network dome camera suitable for day & night operation, and features a varifocal lens. With a 1/3" progressive scan CCD, the camera unit produces motion blur-free video in daylight whereas the 9-22mm zoom lens takes care of varied area of coverage. 20-bit digital signal and image processing augments this CCTV camera's ability by revealing details in video image.
While the NDN-498V09-21P camera switches automatically from day-mode to night mode and vice versa, its NightSense feature in conjunction with SensUp dynamic enables moonlight-viewing (up to 0.0099 lux in monochrome) by increasing the sensitivity of the IP camera. On the other hand, the 2X-Dynamic Engine produces images with high dynamic range from high-contrast daylight visuals. In tricky backlit situations, the network camera's SmartBLC feature compensates for strong back light in order to reproduce a clear view of subject in the foreground. Autoblack feature helps to look through low-contrast scenes due to foggy or smoky weather.
IP 66 (NEMA-4X) standard water resistance makes the NDN-498V09-21P camera ideal for outdoor use while the unit's cast aluminum casing, polycarbonate dome and hardened inner liner withstand up to the equivalent of 120 lb (55kg) force, making it suitable for security surveillance. Six pre-programmed operating modes are available for individual situations, and the modes are fully programmable. Private Masking feature of the NDN-498V09-21P allows masking/blocking of four different privacy zones or specific parts of a scene which can be pre-programmed by the users.
The NDN-498V09-21P camera can simultaneously output two H.264 video streams along with one M-JPEG stream onto a network. The latter stream can further be integrated with third-party JPEG or M-JPEG-compatible video management systems. Captured video content can be accessed in a variety of ways such as using a web browser on a PC, with VIDOS or Bosch Video Management Systems (BVMS), or with Bosch's DiBos Digital Video Recorder.
Basic video content analysis features are integrated into the camera via the Motion+ video analysis system that incorporates a motion analysis algorithm which provides object size filtering and advanced tamper detection capabilities.
Three power options - PoE (Power-over-Ethernet), 24 VAC, and 12 VDC increase its flexibility, and a UPS can also be used for continuous operation even during a power failure. The NDN-498V09-21P can be configured either over IP or by using on-body control buttons. When a new firmware becomes available, the FlexiDome camera can be remotely upgraded without a need to uninstall it physically. The NDN-498V09-21P conforms to the Open Network Video Interface Forum (ONVIF) specification for smooth interoperability between network video products. Among other notable features are built-in video motion detection, full support for iSCSI recording and internet streaming, and flush mounting option.
Vandal-resistant, network dome camera suitable for day & night operation
1/3" progressive scan CCD offers reduced motion blur
9-22mm varifocal lens for variable field of coverage
20-bit digital signal and image processing reveal details in video image
Automatically switches modes for day/night operation
NightSense feature along with SensUp dynamic increases the FlexiDome2X Day/Night IP camera's sensitivity to view in up to 0.0099 lux in monochrome
2X-Dynamic engine reproduces images with wide dynamic range
SmartBLC feature improves backlit images
Offers Autoblack feature for low-contrast scenes
Vandal-resistant cast aluminum casing with polycarbonate dome and hardened inner liner withstand up to 120lb (55kg) force
Complies with IP 66 (NEMA-4X) water resistance standards enabling outdoor use
Programmable private masking to mask up to four different parts of a scene
Provides tri-stream video (two H.264 video streams along with one M-JPEG stream simultaneously)
Provides M-JPEG video stream integration with JPEG or M-JPEG-compatible video management systems
Offers six pre-programmed operating modes for typical applications along with manual full programming capability to optimize the mode for custom requirements
Integrates basic video content analysis features via Motion+ video analysis system
Incorporates a motion analysis algorithm which provides object size filtering and advanced tamper detection capabilities
Built-in video motion detection and additional processing power for optional video content analysis systems
Configurable either over IP or by using on-body control buttons
Offers remote firmware upgrade option eliminating the need to physically uninstall the unit
Conforms to ONVIF specifications for interoperability between network video products regardless of manufacturer
Three power options- PoE (Power-over-Ethernet), 24 VAC, and 12 VDC increase its flexibility, and a UPS can also be used for continuous operation even during a power failure
Secured access with password protection
Full support for iSCSI recording
Includes H.264 compression, bandwidth throttling, and multicasting capabilities
Operating temperature without heater on: -20 ºC to +50 ºC (-4 ºF to +122 ºF)
Suitable for indoor as well as outdoor use via support for flush mounting option